CP offers a wide range of rotating vane type air motors within a power range of 0.26kW (0.35hp) to 0.66kW (0.85hp). Most motors can be supplied as single rotation or reversible. Reversible motors have keyed shafts, while single direction motors can be supplied with threaded shafts or alternatives.

Advantages:

• Compact, with high power to weight ratio.
• The output speed and torque can be simply controlled by regulating either the air pressure or air flow.
• No expensive control equipment is required.
• If a motor is loaded to a stalled condition and held there for any length of time, no damage is caused to the motor.
• When the load is released, the air motor will reach free running speed usually within one third to one half of a revolution.
• No risk of overheating either when continuously run or frequent stop/starts or reversing. Note that this condition assumes the use of an inline lubrication system.
• Reversing motors require simple control of air pressure into ports in the control top of the motor to determine direction of rotation. To reverse the direction of rotation takes milliseconds to complete.
• Resists moisture, dust, heat. Is generally explosion proof and can be used safely in most hazardous situations.

Download Chicago Pneumatic Air Motors Catalog.

DM6, DM65 Series 0.26kW (0.35hp) Maximum Torque 8Nm (5.9 lbf ft), Non Reversible
2DM6 Series 0.26kW (0.35hp) Maximum Torque 8Nm (5.9 lbf ft), Reversible
HM Series 0.45kW (0.6hp) Maximum Torque 41Nm (30 lbf ft), Non Reversible
HM55 Series 0.63kW (0.84hp) Maximum Torque 41Nm (30 lbf ft), Non Reversible
2HM5 Series 0.66kW (0.85hp) Maximum Torque 41Nm (30 lbf ft), Reversible
2H410 Series 0.66kW (0.85hp) Maximum Torque 106Nm (78 lbf ft), Worm Drive Motors

For more information on Air Motors Selection, usage tips and controls, please visit: www.airmotors.ca.