QC30 - Quick Change 30

EOA modular robot tool changers lead the industry with a full product line covering up to 1200 lbs (545Kg). A wide variety of utilities are available to quick disconnect, I/O, air, water, weld power, servo power, vacuum lines.

• Simple Locking mechanism comes with a lifetime warranty
• The best weight to payload ratio in the industry
• Hard anodize for improved wear over long periods
• Modular design allows for cost effectiveness over a wide range of user needs

datasheet in pdf

RHC - Robotic Tool Changer

Facilitates the changing of end effector tooling on robots to accommodate the assembly of many different parts on the same assembly machine. Multiple pneumatic connections and optional electrical contacts make the RHC series an excellent choice.

• Conical seat provides easy connection with tool adapter and increased payloads
• Made from 7057-T6 aircraft quality aluminum, hardcoat to RC60. Teflon impregnated for maximum wear resistance
• Failsafe locking mechanism maintains connection even with the loss of air
• Unique latching mechanism pulls the tool plate into the body, preloading the tool plate for excellent rigidity

datasheet in pdf
maintenance in pdf

QC60 - Quick Change 60

EOA modular tool changers lead the industry with a full product line covering up to 1200lbs (545Kg). A wide variety of utilities are available to quick diconnect, I/O, air, water, weld power, servo power, vacuum lines.

• Simple locking mechanism comes with a lifetime warranty
• The best weight to payload ratio in the industry
• Hard anodize for improved wear over long periods
• Modular design allows for cost effectiveness over a wide range of user needs

datasheet in pdf

QC400 - Quick Change 400

EOA modular robot tool changers lead the industry with full product line covering up to 1200lbs (545Kg). A wide variety of utilities are available to quick disconnect, I/O, air, water, weld power, servo power, vacuum lines.

• Simple locking mechanism comes with a lifetime warranty
• The best weight to payload ratio in the industry
• Hard anodize for improved wear over long periods
• Modular design allows for cost effectiveness over a wide range of user needs

datasheet in pdf

QC500 - Quick Change 500

EOA modular robot tool changer lead the industry with a full product line covering up to 1200lbs (545Kg). A wide variety of utilities are available to quick disconnect, I/O, air, water, weld power, servo power, vacuum lines.

• Simple locking mechanism comes with a lifetime warranty
• The best weight to payload ratio in the industry
• Hard anodize for improved wear over long periods
• Modular design allows for cost effectiveness overa wide range of user needs

datasheet in pdf

QC1200 - Quick Change 1200

EOA modular robot tool changers lead the industry with a full product line covering up to 1200lbs (545Kg). A wide variety of utilities are available to quick disconnect, I/O, air, water, weld power, servo power, vacuum lines.

• Simple locking mechanism comes with a lifetime warranty
• The best weight to payload ratio in the industry
• Hard anodize for improved wear over long periods
• Modular design allows for cost effectiveness over a wide range of user needs

datasheet in pdf

TP - Machine Load-Unload Rotary Actuator

Range of swivel head including two models. Designed for loading / unloading applications

• Built-in air pipes
• Suit for industrial applications especially in machining environment
• No interface needed for REP or RIP grippers

PNS - Press Nest Stands Lower Tooling

A lower tooling stand that has a standard foot spacing to be mounted in a tandem press that is idled. A nest can be attached via the Disconnect housing. This will allow for part pass through.

• Available with multiple adapter options and electrical configurations.

RDC-10 - Bayonets

The Bayonet is used in conjunction with the Quick Disconnect Housing to provide an efficient method for changing tools manually.

• Interfaces with 10T Booms.
• Optional 3 or 5 port air module.
• Optional electrical interface available.

datasheet in pdf

RDC-25 - Bayonets

The Bayonet is used in conjunction with the Quick Disconnect Housing to provide an efficient method for changing tools manually.

• Two, hardened alignment pins allows quick and accurate installation into the housing.

datasheet in pdf

RDC-25-2HT - Bayonets

The Hi-Torque Series Bayonet is used in conjunction with the Quick Disconnect Housing to provide an efficient method for changing tools manually.

• The extended clamp area increases the holding surface and torque capacity for high-speed applications.

datasheet in pdf

RDC-40 - Bayonets

The Bayonet is used in conjunction with the Quick Disconnect Housing to provide an efficient method for changing tools manually.

• Two hardened alignment pins allows quick and accurate installation into the Quick Disconnect Housing.
• The extended body provides additional support for high-torque applications.

RDC-60 - Bayonets

The Bayonet is used in conjunction with the Quick Disconnect Housing to provide an efficient method for changing tools manually.

• Two, hardened alignment pins allows quick and accurate installation into the housing

RDC-60-2HT - Hi-Torque Series Bayonets

The Hi-Torque Series Bayonet is used in conjunction with the Quick Disconnect Housing to provide an efficient method for changing tools manually.

• The extended clamp area increases the holding surface and torque capacity for high-speed applications.

datasheet in pdf

RDN-10 - Housings

The Quick Disconnect Housing is used in conjunction with the 10 Series Bayonet to provide an efficient method for changing tools manually.

• Actuation of the steel handle allows quick and accurate installation by pulling the bayonet into a fixed position within the
• Internal urethane rings eliminate vibration and seat the bayonet into a clamped position.

RDN-25 - Housings

The Quick Disconnect Housing is used in conjunction with the Bayonet to provide an efficient method for changing tools manually.

• Actuation of the steel handle allows quick and accurate installation by pulling the bayonet into a fixed position within the
• Internal urethane rings eliminate vibration and seat the bayonet into a clamped position.
• Hardened steel retainer slots reduce wear and extend product life.

datasheet in pdf

RDN-40 - Housings

The Quick Disconnect Housing is used in conjunction with the Bayonet to provide an efficient method for changing tools manually

• Actuation of the steel handle allows quick and accurate installation by pulling the bayonet into a fixed position within the
• The internal urethane rings eliminate vibration and seat the bayonet into a clamped position.
• Hardened steel retainer slots reduce wear and extend product life.

TBN-150 - Bayonets

The CPI Series 150 Bayonet is used in conjunction with either Series 150 Housing to provide a quick disconnect point.

• Two hardened alignment pins allows quick and accurate installation into the housing.

datasheet in pdf

TBN-40 - Bayonets

The CPI Series 40 Bayonet is used in conjunction with either Series 40 Housing to provide a quick disconnect point.

• Two hardened alignment pins allows quick and accurate installation into the housing.

TTN-150 - Housings

The Quick Disconnect Housing is used in conjunction with the 150 Series Bayonet to provide an efficient method for changing tools manually.

• Actuation of the steel handle allows quick and accurate installation by pulling the bayonet into a fixed position within the
• Internal urethane rings eliminate vibration and seat the bayonet into a clamped position.
• Used with bayonets for 1.50" diameter tube.

datasheet in pdf