After-Hours Service:
514-697-8810 (East)
905-301-4523 (Central)
604-278-4290 (West)
|
|
Drilling/Tapping Units
Hypneumat products include a full line of drilling units and tapping units, machines and controls. Commander carries multi spindle heads. Snow offers drilling machines, tapping machines, clutch type tapping heads and fixtures.
Drilling and Tapping Units |
|||||||
 |
Unit | Drill Capacity Steel (inches) | Tap Capacity Steel (inches) | Stroke Length (inches) | Thrust @ 100 psi hyd. (pound) | Thrust @ 200 psi hyd. (pounds) | Torque (in-lbs) |
| S200 | 1/4" | 1/4" | 2 & 4" | 235 | 470 | 38 | |
| M200 | 1/4" | 1/4" | 2 & 4" | 235 | 470 | 38 | |
| DQ300 | 1/2" | 1/2" | 3-1/2 to 12" | 466 | 932 | 420 | |
| M300 | 1/2" | 1/2" | 3-1/2 to 8" | 466 | 932 | 420 | |
| SP300 | 1/2" | 1/2" | 3-1/2 to 18" | 607 | 1214 | 420 | |
| DQ400 | 3/4" | 3/4" | 6" | 1107 | 2214 | 420 | |
| M400 | 3/4" | 3/4" | 6" | 1107 | 2214 | 420 | |
| DQ500 | 1" + | 1" + | 6 to 12" | 1649 | 4122 | 900 | |
Lead Screw Tap Units |
|||
 |
Unit | Drill Capacity Steel(inches) | Tap Capacity Steel (inches) |
| LS175 | 1/2" | 1-3/4" | |
| MLS175 | 1/2" | 1-3/4" | |
| LS300 | 1/2" | 3-1/2 to 12" | |
| LS400 | 1" | 6" | |
| LS500 | 1" | 6 to 12" | |
| Commander Adjustable Geared Drill Heads | Commander Universal Joint Drill Heads | |||
 |
 |
|||
| • Accessories: adaptations, drill chip breaker, drill & tap collets, motor reversing unit. | ||||
Snow Products:
- Snow Standard single spindle vertical drilling & tapping machines
- Snow Multi-spindle Heads
- Snow Tapping Attachments
- Snow Vises, Loaders and Fixtures
For technical assistance and sales enquiries, contact us:
- Phone: 1-888-WAINBEE (924-6233)
- E-mail: Sales, Technical Services, General Enquiries.