HMV-02 Two Position Motors with two-position control (flip-flop).
Two position motors are suitable for both open and closed loop circuits. They are at maximum flow displacement (V-max) with no control signal and make a smooth transition to minimum displacement when a control signal is applied. The control can either be:
- hydraulic shifted with pilot pressure
- electric shifted with a direct current electric signal
Servo supply pressure can be provided externally or internally, depending on the motor's design configuration.
| HMV 55 | HMV 75 | HMV 105 | HMV 135 | HMV 135D | HMV 210 | |||||
| cm3 / rev | In3 / rev | 55 | 3.36 | 75 | 4.57 | 105 | 6.40 | 135 | 8.23 | 270 16.5 | 210 12.8 |
| Pressure Ratings | Nominal 5000 PSIG Maximum 6090 PSIG Peak 7250 PSIG | |||||||||
| Rated Speed Max Disp | 4000 | 3700 | 3300 | 3000 | 3000 | 2900 | ||||
| Rated Speed Min Disp | 5000 | 4600 | 4100 | 3700 | 3700 | 3200 | ||||
| Envelope Size: Length | 9.0 | 9.5 | 10.5 | 11.3 | 21.3 | 13.3 | ||||
| Width | 8.0 | 8.2 | 8.2 | 10.1 | 10.1 | 10.6 | ||||
| Height | 9.2 | 9.8 | 9.8 | 10.7 | 11.5 | 10.6 | ||||
| Weight | 75.0 | 71.0 | 73.0 | 125.0 | 247.0 | 222.7 | ||||
| HP Rating Count | 107.0 | 161.0 | 205.0 | 241.0 | 397 | |||||
VIEW:
* HMV-02 Motor Data & Specifications (PDF, 644,0Kb)
* HMF/VR-02 Motor Brochure PDF (PDF, 411,4Kb)
* Linde: Providing a New Angle for High Pressure Performance (PDF, 86,Kb)
* Series 02 New Generation Hydraulics (PDF, 303,9Kb)
For More Information on Variable Motor / HMV Click Here.