Parker Polyethylene Instrument Grade Tubing - E/EB Series
E-43-O-0500
Prix Spécial
0,25 $
Prix normal
0,51 $
Disponibilité :
En rupture de stock
Parker polyethylene (PE) tubing is produced from a high molecular weight resin to provide increased dimensional stability, uniformity and long-term strength. Parker PE tubing meets the FDA and NSF-51 requirements for food contact applications and NSF-61 for potable water.
The tubing may be used in general-purpose instrument applications as well as all food handling applications except holding food during cooking. The black tubing, EB series, contains an ultraviolet inhibitor which is recommended for use in sunlit areas and in close proximity to high, ultraviolet light sources.
Standard black is not approved for food handling applications, but NSF-listed and FDA-compliant black can be ordered on special request. A tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure spikes may occur.
Markets
• Water Market
• Food & Beverage
• Fluid Handling
• Industrial Pneumatics
• Chemical transfer
Features
• Made from 100% virgin resin material for long term strength
• ASTM D-1693 (10% IGEPAL) For excellent stress crack resistance maximizes the service life
• UV stabilized to reduce fading, cracking and loss of strength from sunlight
• Meets FDA, NSF-51 requirements for food contact applications and NSF-61 for potable water
Applications:
• Potable water
• Beverage dispensers
• Chemical transfer
• Low pressure pneumatics
Certifications/Compliance:
• FDA compliant for food contact
• ASTM D-1693 (10% IGEPAL) for stress crack resistance
• ASTM D-1248, Type I, Class A, Category 4, Grade E5
• NSF – 51
• NSF – 61
Notes:
• Qualified with Parker Fluid System Connectors Division (See PFD Catalog CAT. 4660 or FSC Catalog CAT3501E USA for specific fittings)
• Opaque colors are available in black, blue, gray, green, orange, purple, red, white and yellow
• Black (EB) tubing contains an ultraviolet inhibitor which is recommended for use in sunlit areas and in close proximity to high ultraviolet light source
• The recommended operating temperature range for service at rated pressures with compatible fluids is -80°F (-62°C) to +150°F (+66°C)
• A tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure
• Wall thickness is for reference only
The tubing may be used in general-purpose instrument applications as well as all food handling applications except holding food during cooking. The black tubing, EB series, contains an ultraviolet inhibitor which is recommended for use in sunlit areas and in close proximity to high, ultraviolet light sources.
Standard black is not approved for food handling applications, but NSF-listed and FDA-compliant black can be ordered on special request. A tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure spikes may occur.
Markets
• Water Market
• Food & Beverage
• Fluid Handling
• Industrial Pneumatics
• Chemical transfer
Features
• Made from 100% virgin resin material for long term strength
• ASTM D-1693 (10% IGEPAL) For excellent stress crack resistance maximizes the service life
• UV stabilized to reduce fading, cracking and loss of strength from sunlight
• Meets FDA, NSF-51 requirements for food contact applications and NSF-61 for potable water
Applications:
• Potable water
• Beverage dispensers
• Chemical transfer
• Low pressure pneumatics
Certifications/Compliance:
• FDA compliant for food contact
• ASTM D-1693 (10% IGEPAL) for stress crack resistance
• ASTM D-1248, Type I, Class A, Category 4, Grade E5
• NSF – 51
• NSF – 61
Notes:
• Qualified with Parker Fluid System Connectors Division (See PFD Catalog CAT. 4660 or FSC Catalog CAT3501E USA for specific fittings)
• Opaque colors are available in black, blue, gray, green, orange, purple, red, white and yellow
• Black (EB) tubing contains an ultraviolet inhibitor which is recommended for use in sunlit areas and in close proximity to high ultraviolet light source
• The recommended operating temperature range for service at rated pressures with compatible fluids is -80°F (-62°C) to +150°F (+66°C)
• A tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure
• Wall thickness is for reference only
| Nom du produit | Parker Polyethylene Instrument Grade Tubing - E/EB Series |
|---|---|
| SKU | E-43-O-0500 |
| Application | Chemicals, Fluid Transfer, Pneumatic |
| Colour | Orange |
| Raccord Compatible | Flow Controls, Prestolok, Liquifit, TrueSeal, Compression |
| Avertissement | The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. |
| Pression de service maximum (bar) | 8.3 bar |
| Temp de fonctionnement maximum (C) | 66 °C |
| Temp de fonctionnement maximum (F) | 150 °F |
| Médias | Air, Potable Water, Water |
| Pression d'éclatement min. (Bar) | 33.1 bar |
| Pression d'éclatement min. (Bar) | 480 psi |
| Rayon de courbure minimum | 1 inch |
| Température de fonctionnement minimum (F) | -80 °F |
| Température de fonctionnement minimum © | -62 °C |
| Type d'emballage | 500 ft |
| Catégorie Parker | Polyethylene Instrument Grade Tubing - E/EB Series |
| Spécifications respectées | FDA compliant, ASTM D-1693 (10% IGEPAL) for stress crack resistance, Conforms to ASTM D-1248, Type I, Class A, Category 4, Grade E5, NSF-51, NSF-61 |
| Ressources | Food & Beverage Transfer - Hose, Tubing, Fittings--4660-Food - FDA compliant hose, NSF-51 tubing and fittings for food and beverage applications. Sept. 2019 Parflex Ravenna ISO Cert 16949 - ISO/TS 16949:2009 for Parflex Division - Ravenna Sept 2018 Catalog 4660 Parflex Thermoplastic & Fluoropolymer Hose and Tubing--CAT-4660 - Catalog 4660 Parflex Thermoplastic & Fluoropolymer Hose and Tubing--CAT-4660 Global Automotive Declarative Substances List - This document is responsive to the objectives of the Global Automotive Declarative Substance List (GADSL) as defined by the Global Automotive Stakeholders Group (GASG) Nov 2019Parker Safety Guide for Selecting Hose, Tubing, Fittings and Accessories - Publication 4400-B-1 Safety Guide - Parker Safety Guide for Selecting and Using Hose, Tubing, Fittings and Related Accessories October 2015, Rev AParflex Division MSDS - Parflex Material Safety Data Sheets (MSDS) June 2019 |
| Matériau du tube | Polyethylene |
| Tube I.D. (pouce) | #N/A |
| Épaisseur de paroi du tube | 0.04 inch |
| Pression de fonctionnement maximale (Mpa) | 120 psi |
| Diamètre extérieur du tube | 1/4 inch |